The Best Refrigeration Flaring Tool Reviews

Top 50 Best Refrigeration Flaring Tool Products Features

Pioneer Diamante Series Ductless Mini-Split Air Conditioner Inverter Heat Pump Full Set with 16 Ft. Kit

Features

  • High Efficiency Diamante Ductless Mini Split Inverter Heat Pump System
  • Use for both cooling and heating: 36000 BTU/hour with 17 SEER and 9 HSPF efficiency
  • Diamante series carries a full line of low-ambient wall-mounted mini splits with capacities ranging from 9,000 BTU/hour to 36,000 BTU/hour for various residential and light commercial applications
  • Complete system set including: indoor (fan coil) section, outdoor (condenser) section, wireless remote controller with remote holder, 16 ft. L line set with other installation accessories, free vibration absorber feet for the condensing unit
  • Voltage: 208~230V, 60Hz, 1Ph

Mastercool (69100) Complete A/C Recovery System,Blue

Features

  • High performance oil-less compressor
  • High volume cooling fan design
  • High and low pressure cut-off Switch
  • Liquid compatible head-valve system
  • Fully reinforced hard plastic casing

Navac NP12DM Vacuum Pump, 12 CFM, 5 Microns, DC Inverter, Master Series

Features

  • Power Supply 115V/60Hz
  • Pump Design-Dual stage
  • Motor Power 1/2 HP
  • Dimensions 16.3×6×12.1
  • Oil Capacity 28oz

Mastercool 69110 Automotive A/C Recovery System,Blue

Features

  • This is a RECOVERY ONLY unit. Refrigerant recharge CANNOT be performed.
  • DESIGN CERTIFIED to meet SAE J2810 while also being 100% U.S. designed, assembled and tested
  • RECOVERS AND REMOVES oil from refrigerant; For R134a refrigerant
  • STATE OF THE ART ½ horsepower oil-less compressor with built-in high volume cooling fan for fast recovery
  • COMPRESSOR PROTECTED by a safety high pressure cut-off switch that shuts the unit off when pressure exceed 500 psi
  • STAINLESS STEEL BALL VALVE DESIGNED MANIFOLD controls the refrigerant flow smoothly and quickly

hydraulic crimping tool VHE-42B hydraulic pipe expander air conditioning copper pipe expander 10mm-42mm Refrigeration tool

Features

  • VHE-42B hydraulic pipe expander air conditioning copper pipe expander
  • Refrigeration tool
  • Model Number: VHE-42B

CPS TLB410KIT Mini-Split Tool Kit

Features

  • This kit includes everything you need to service ductless mini-split and central A/C systems with 1/4 and 5/16 service ports
  • Comes with both Imperial and Metric Hex Key Sets
  • Comes with Pro-Set Premium Piston Series Manifold, 5 Premium Pro-Set Charging Hoses, Valve Core Tool, Brass Adapters and Caps, Imperial and Metric Torque Wrench Set and Instructions, Tube Cutter 1/8 to 1-1/4, Tube Flaring Tool, Deburring Tool with extra blade, R410A Flare Size Gauge, BTLDTW digital torque wrench
  • Keep everything together with the included large, 16 rubber bottom tool organizer

Fieldpiece SM480V SMAN Digital Manifold Wireless Data Logging

Features

  • SMAN Manifold Micron Gauge (4 Port)
  • Newly designed SMAN manifold
  • Replacement for SMAN400 series
  • Four valve manifold with micron gauge
  • Toughest, most advanced digital refrigerant manifold on the market

Appion SPDKIT-V - MegaFlow Vacuum Speed Kit

Features

  • MegaFlow Vacuum Speed Kit - Works with 1/4in and 5/16in System Connections
  • Works with 1/4in and 5/16in System Connections
  • Maximize the Flow of ANY Vacuum Pump - Works on all vacuum pump with 3/8in MFL and 1/2in MFL fittings
  • Up to 16x Greater Flow when compared to evacuation with a manifold
  • Fast and Simple - Simple setup, Fast evacuation, Reduced job times

Ridgid 41300 455 Ratchet Flare Tool

Features

  • This item is 41300 TOOL, FLARE 455
  • This product is used for multitool-accessories
  • This product manufacture by United States
  • Ratcheting Feed Screw Handle
  • Gives Uniform Flare Walls Without Galling
  • Flares Steel, Stainless Steel, Hard Copper, and Brass Tubing
  • Hardened Steel Flaring Cone
  • Handle Clutch Releases When Flare is Complete

YELLOW JACKET 60991 Mini-Split Tool Kit

Features

  • Designed to handle all mini-split refrigerants and pressures (including heating modes)
  • Creates high quality flares for 3/16″ to 3/4″ o.D. Tubing
  • Mini-split hex keys – 5/32″, 3/16″, 5Mm, 6Mm
  • Vacuum/charge valve with side port

Navac Cordless Vacuum Pump, 2cfm, Master-Series (NP2DLM)

Features

  • ·2 CFM, 23 microns
  • Up to 1 hour running time
  • Brushless DC technology
  • Twin cylinder
  • ·Backflow prevention check valve

Hilitand Tube Expander Pipe,Hydraulic Tube Expander Pipe Flaring Tool for U-Type Copper Pipe 10-42mm CT300AL

Features

  • Excellent materials create perfect quality and long service life
  • There is a storage box which you can store these tools, easy to carry
  • The tube expander is suitable for 10-42mm tube specification
  • Can be used for copper pipes and aluminum pipes
  • Including 11pcs expander heads, convenient to replace

Yellow Jacket 60493

Features

  • Hand Tools
  • Manufacturer: Yellow Jacket
  • Country of manufacture: Taiwan

hydraulic crimping tool Bending Device CT-999R Copper Pipe Tube Bender 6mm-22mm Multi-bending Device Combination Of The Manual Lever Bending Device

Features

  • For 6MM to 22MM hose with coated hose. Can also be used for the following multi-layer tube 26MM.
  • Wide range of applications:
  • For bathroom, heating, air conditioning, refrigeration, hydraulic areas. Also used for DINENl057 standard steel pipe.
  • Retract the fire pipe, the pressure fittings system tube.

YEZIQ Hydraulic Tool- Bending Device CT-999R Copper Pipe Tube Bender 6mm-22mm Multi-Bending Device Combination of The Manual Lever Bending Device

Features

  • For 6MM to 22MM hose with coated hose. Can also be used for the following multi-layer tube 26MM.
  • Wide range of applications:
  • For bathroom, heating, air conditioning, refrigeration, hydraulic areas. Also used for DINENl057 standard steel pipe.
  • Retract the fire pipe, the pressure fittings system tube.

Tool Parts VFT-808-MIS Eccentric Flaring Tool for Refrigeration Contain tube cutter Refrigeration repair tools

Features

  • Package Includes: plastic box | Stroke:45mm | Rahau Pex Fitting Tool
  • 1 Plumbing System Tool Sets PEX 1632 Used for REHAU HIS 311 hot and cold water PLUMBING SYSTEM underfloor heating & cooling water system, recycled water system, rainwater system.
  • 2 Use in normal installation as well as tight corner installation.
  • 3 Saving of time: with double compression jaws, possible to have two sizes of compression jaws without a tool change.
  • 4 Robust and durable.

YELLOW JACKET 60493 Hydraulic Tube Expander Kit

Features

  • Saves time and money
  • Eliminates fittings
  • Easy operation
  • Hydraulic power
  • Lightweight and portable

9TRADING CT300A Lever Tubing Expander Tool Swaging Kit HVAC Tools Tube Piping & Pipe

Features

  • Lever action Expander Tool Set does the same job a swaging tool does without the hammering.
  • Does a professional job every time.
  • 11 Tube sizes: 3/8", 1/2", 5/8", 3/4", 7/8", 1" 1-1/8" 1-1/4" 1-3/8" 1-1/2" 1-5/8". OD soft copper Tubing.
  • Includes: Tubing cutter 3/16" to 1-5/8" cutting capacity and tubing reamer.
  • Comes in a Plastic case

Hydraulic tools Hydraulic Cylinder Hydraulic Pipe And Tube Bender With 4 Pcs Bending Formers Tools For Pipe Plastic Forming Pipe Bending Machine

Features

  • Mainly used for pipe plastic forming,pipe bending machine without heating sand filling process.
  • Curved arc smooth,clear,small deformation.
  • Easy to use and carry.
  • Suitable for factories and mines,rural areas,chemical industry,refrigeration,construction,electrical lines,pipe installation
  • The molds are made of ductile iron,which has higher strength,better toughness and plasticity than ordinary gray cast iron.

Hilmor 1839015 Compact Swage Tool Kit - HVAC Tools and Equipment, Black

Features

  • SWAGING TOOL: Combination of power and control makes this ideal for HVAC/R instillation, maintenance, and repairs. Can swage 1-5/8" tubing to 5/16" without a crack. Includes a deburring tool, designed to remove sharp edges and burrs
  • SINGLE HAND OPERATION: One handed setup made possible by an innovative hydraulic mechanism and release button. Convenient and comfortable design. Propietary pistol design, combined with a weight of only 8.5 lbs, reduces user fatigue
  • TO USE: Select the correct head, place it on the tool and make a quality swage. Simply press release trigger for easy tube release, ensuring no metal damage
  • EXTREMELY VERSATILE: The pistol shape design means it can fit in the small, hard to reach areas
  • INCLUDES: Swage body, deburrer, kit box, and 5 expander heads (3/8", 1/2", 5/8", 3/4", 7/8")

GEETAC 6 Dies Flaring Tools for 1/4" - 3/4" Refrigeration HVAC 45 Degree Heavy Duty Eccentric Cone Type Flaring Kit

Features

  • High strength heat-treated aluminum alloy Clamp & Yoke are durable and lightweight
  • Clamp features double ring bar, permanently leveling malposition, with ball postion holes embedded on the side, help to precise locating and flaring
  • Arc flame with ergonomics design, makes the flare a breeze
  • Metric & Inch 2 in 1 Clamp: For tube inch: 1/4", 5/16", 3/8", 1/2", 5/8", 3/4"; Metric: 6mm, 9mm, 10mm 12mm, 16mm, 19mm) O.D.Tubing
  • Produces 45 Degree flares in soft copper, brass, aluminum and mild steel tubing with this accuracy eccentric cone flaring tool

NAVAC NEF6LM Cordless Power Flaring Tool 3/4" Max OD

Features

  • Complete a flare in 15 seconds
  • Over 100 flares per charge
  • Ultra light at 2.9 lbs
  • Quick connect with ready-to-use clamps
  • Flare gauge included

1"- 3" Hand Manual Floor Type Compact Bender Bending Metal Fabrication & Welding,Jikkolumlukka

Features

  • Condition : New
  • Type : Manual Floor Type Compact Bender
  • Features : 1).Compact bender designed to make a variety of bends on square or solid round stock. Provide an economical way to achieve many of the most needed bends. 2).Light weight enough to be used as a portable bender on field service trucks. 3).Mild steel capacity 8 x 32”, 6 x 50”, 5/16” x 1 1/4”, 1/4” x 2” 4).Bending angle 0 - 200 degree 5).Height: 38" 6).Right Angle Bending Capacity: 3/16" x 1 1/4", 1/4" x 1 1/4" 7).Center Pin Capacity: 1/4" (use 1" die for greater)
  • Quantity : 1 pc. 1"- 3" Hand Manual Floor Type Compact Bender

FEEE-ZC 45 Degree Flaring and Swaging Tool Kit for Refrigeration Soft Copper Tube

Features

  • ★ Ratchet knob: ratchet fast feed, light and suitable for use in small spaces
  • ★ Door frame: arc door frame, high-end ergonomic design, beautiful
  • ★ Expansion clamp: double-ring square steel splint, permanently flat and in good position
  • ★ Cutter: 6 rollers are uniquely designed to cut the tube and save effort, high-quality aluminum alloy material is durable
  • ★ Burr knife: used to scrape the burr of the copper pipe mouth, sharp, durable and easy to replace

Table of Contents