The Best 1 Hp Open Well Submersible Pump Reviews

Top 50 Best 1 Hp Open Well Submersible Pump Products Features

GOULDS Water Technology 45HB15013 High Pressure Centrifugal Booster Pump, 5 hp, 5 Stages, 1 Phase, 208-230V, Open Drip Proof Motor, W.E.L. 13-7/8", 69 GPM, Motor Frame 184

Features

  • Multi-Stage Design: This configuration provides a steady, quiet and vibration-free operation for years of trouble-free service
  • Impellers and Diffusers: Glass filled thermoplastic. Precision molded for high efficiencies
  • Bowls: Constructed with 300 series stainless steel. Rabbet lock for positive alignment – no gaskets required
  • Mechanical Seal: Carbon/ceramic faces. BUNA elastomers 300 series stainless steel metal parts
  • Motor: Close-coupled design. Ball bearings carry all radial/axial thrust loads. Designed for continuous operation. All ratings are within working limits of the motor

Goulds 25GS10412C Submersible Water Well Pump, 25 GPM, 1 HP, 7 Stages, 3 Wire, 230 V Control Box is INCLUDED.

Features

  • Pump can be operated continuously without damage to the motor
  • Discharge head/check valve made of cast 303 stainless steel for strength and durability
  • Easy access to motor mounting nuts using standard open end wrench
  • Hexagonal shaft design for positive impeller drive
  • Proprietary engineered polymer bearing is strong and resistant to abrasion and wear

Goulds 18GS10412C Submersible Water Well Pump, 18 GPM, 1 HP, 8 Stages, 3 Wire, 230 V Control Box is INCLUDED.

Features

  • Pump can be operated continuously without damage to the motor
  • Discharge head/check valve made of cast 303 stainless steel for strength and durability
  • Easy access to motor mounting nuts using standard open end wrench
  • Hexagonal shaft design for positive impeller drive
  • Proprietary engineered polymer bearing is strong and resistant to abrasion and wear

Goulds WS1032BF Submersible Sewage Pump, 1 HP, Three Phase, 230 V, 5.8 Max Amps

Features

  • Cast iron, semi-open, non-clog impeller is dynamically balanced with pump out vanes for mechanical seal protection
  • Cast iron flanged volute type for maximum efficiency. Designed for easy installation on A10-20 slide rail or base elbow rail systems
  • Mechanical seal with SILICON CARBIDE VS. SILICON CARBIDE sealing faces for superior abrasive resistance, stainless steel metal parts, BUNA-N elastomers
  • Corrosion-resistant shaft made of 300 series stainless steel
  • Threaded design. Locknut on all models to guard against component damage on accidental reverse rotation

Goulds WS1012BF Submersible Sewage Pump, 1 HP, Single Phase, 230 V, 12.3 Max Amps

Features

  • Cast iron, semi-open, non-clog impeller is dynamically balanced with pump out vanes for mechanical seal protection
  • Cast iron flanged volute type for maximum efficiency. Designed for easy installation on A10-20 slide rail or base elbow rail systems
  • Mechanical seal with SILICON CARBIDE VS. SILICON CARBIDE sealing faces for superior abrasive resistance, stainless steel metal parts, BUNA-N elastomers
  • Corrosion-resistant shaft made of 300 series stainless steel
  • Threaded design. Locknut on all models to guard against component damage on accidental reverse rotation

Goulds GT30 Irrigator Centrifugal Pump, 3 HP, Single Phase, 230 V, ODP Enclosure

Features

  • Built-in overload with automatic reset
  • Stainless steel shaft
  • NEMA standard open drip proof motor
  • Powered for continuous operation
  • Diaphragm prevents the seal from running dry

Goulds WS0511BF Submersible Sewage Pump, 1/2 HP, Single Phase, 115 V, 14.5 Max Amps

Features

  • Cast iron, semi-open, non-clog impeller is dynamically balanced with pump out vanes for mechanical seal protection
  • Cast iron flanged volute type for maximum efficiency. Designed for easy installation on A10-20 slide rail or base elbow rail systems
  • Mechanical seal with SILICON CARBIDE VS. SILICON CARBIDE sealing faces for superior abrasive resistance, stainless steel metal parts, BUNA-N elastomers
  • Corrosion-resistant shaft made of 300 series stainless steel
  • Threaded design. Locknut on all models to guard against component damage on accidental reverse rotation

Goulds JRS10 Shallow Water Well Jet Pump, 1 HP, Single Phase, 115/230 V

Features

  • Shallow Jet Pump
  • 1 HP
  • Single Phase
  • 115/230 V

Goulds AGS1011, AGS Series, Grinder Pump, 1 HP, 115 Volts, 1 Phase, 2" NPT Discharge, 54 GPM Max, 66 ft Max Head, 20 ft Cord

Features

  • Stainless steel, axial lobe-cutter design with 8-hole cutting plate
  • Cast Iron semi open 2 vane impeller
  • Cast iron, volute type for high efficiency. Adaptable for guide rail system
  • Motor is designed for continuous operation without damage when fully submerged
  • Upper and lower single row sealed ball bearings for precision positioning of parts and to carry all radial and thrust loads

Submersible Effluent Pump, 1-1/2 HP, 15A

Features

  • Heavy cast iron construction. Additional mounting clamp provided for optional switch mounting to pipe
  • 2 vane semi-open cast iron impeller. Fully adjustable pumping range
  • 416 stainless steel rotor shaft. 2" FNPT threaded discharge with 1-1/2" FNPT flange provided
  • Dual shaft seals. Quick-disconnect power cord. 25ft length standard
  • Single float, mercury free level control. 3 year warranty

Goulds AGS1012, AGS Series, Grinder Pump, 1 HP, 230 Volts, 1 Phase, 2" NPT Discharge, 54 GPM Max, 66 ft Max Head, 20 ft Cord

Features

  • Stainless steel, axial lobe-cutter design with 8-hole cutting plate
  • Cast Iron semi open 2 vane impeller
  • Cast iron, volute type for high efficiency. Adaptable for guide rail system
  • Motor is designed for continuous operation without damage when fully submerged
  • Upper and lower single row sealed ball bearings for precision positioning of parts and to carry all radial and thrust loads

GOULDS Water Technology 10GBC10 High Pressure Multi Stage Booster Pump, 1 hp, Cast Iron, 1 Phase, Open Drip Proof Motor, 60 Hz, 115-230V, 10 Stage

Features

  • Multi-stage Design: Provides steady, quiet, vibration free, operation
  • O-Ring Casing Seal: Reliable high pressure sealing with easy disassembly for maintenance or repair
  • Motors: Close coupled NEMA 56J motors in open drip proof or totally enclosed design. Single phase and three phase available
  • 60 Hz, 3500 RPM
  • Single phase motors have built-in capacitor and overload with automatic reset

Goulds J5 Convertible Jet, Deep Well Pump - 115v/230v - 1/2 hp

Features

  • Convertible: May be used on shallow or deep well applications using appropriate Goulds Water Technology fittings.ServiceableBack pullout design for service without disturbing piping.Two compartment motor for access to wiring and replaceable components.UL778 listed Maximum temperature: 140°F
  • Nozzle clean out plug in shallow well adapter.Corrosion resistant, plastic tubing and fittings are easily removed for cleaning. Premium O-ring design fittings need only be hand tight to seal.Impeller: F.D.A. compliant, glass filled Noryl. Corrosion and abrasion resistant.
  • Diffuser (Guidevane): Bolt down Lexan diffuser has stainless wear ring for extended performance in abrasive conditions.Powered for Continuous Operation: Pump ratings are within the motor manufacturer’s recommended working limits. Can be operated continuously without damage.
  • Corrosion Resistant: Electro-coat paint is baked on.Protected Mechanical Seal: Diaphragm retains water in the casing to ensure the mechanical seal can never run dry.Excellent Air Handling Ability: After initial priming the pump has the ability to re-prime itself. Pumps are manufacturer tested and may contain water inside from such testing
  • APPLICATIONS Specifically designed for: Homes Farms Cottages Booster service SPECIFICATIONS Pump: Pipe connections: 1¼" NPT suction, 1" NPT discharge, 1" NPT drive (pressure) Pressure switch: AS4 preset at 30-50 PSI Motor: NEMA standard 60 Hz 1/2 HP, 115/230 V capacitor start Single phase 3500 RPM Built-in overload with automatic reset Stainless steel shaft Rotation: clockwise when viewed from motor end

Goulds WS0511B Submersible Sewage Pump, 1/2 HP, 115 V, 1 PH, 14.5 Max Amps

Features

  • Cast iron, semi-open, non clog impeller is dynamically balanced with pump out vanes for mechanical seal protection
  • Cast iron volute type for maximum efficiency
  • Designed for easy installation on A10-20 guide rail or base elbow rail systems
  • Mechanical seal with SILICON CARBIDE VS. SILICON CARBIDE sealing faces for superior abrasive resistance, stainless steel metal parts, BUNA-N elastomers
  • Corrosion-resistant stainless steel shaft. Threaded design. Locknut on all models to guard against component damage on accidental reverse rotation

Davey Water Products BT20-30T2-USA Home Pressure Booster Pump with Torrium II Controller

Features

  • Pressure Boost = 50 psi (30 psi at 20 gpm)
  • Stainless Steel Impellers and Pump Casing
  • Power Surge Protected TEFC Motor
  • Dry-Run Protected
  • Flexible S/S FIP Discharge hose

Goulds WE0311M Submersible Effluent Pump, 1/3 HP, Single Phase, 115 V, 10.7 Max Amps

Features

  • Corrosion-resistant, stainless steel shaft with threaded design
  • Designed for continuous operation when fully submerged
  • Capacitor start motor for maximum starting torque

Jabsco 6050-0003 Marine Series Utility General Purpose Pump, 110-Volt, Nitrile Impeller, Open Drip Proof Moto Non-CE, 1" NPT Ports, Bronze

Features

  • 23 GPM (87 LPM) at 10’ (3m) of head, 1" NPT internal ports
  • Bronze impeller body, JABSCO Nitrile Impeller for fresh and salt water as well as diesel, light oils, and antifreeze transfer
  • Recommended for liquid temperatures between 50° to 180°F (10° to 83°C), Replaceable wearplate
  • Lip type shaft seal, 3/4 HP open drip proof (ODP) motor, overload protected, 1725 RPM, 60 Hz, single phase
  • 115/230 VAC, with 8 foot cord and plug (wired for 115VAC operation), 35-1/2 lbs. (approx.) (16.1 kg)

Red Lion RL12G10-2W2V 1-HP 12-GPM 2-Wire 230-Volt Submersible Deep Well Pump

Features

  • Powered by industry standard 2- or 3-wire motors
  • Thermoplastic discharge and motor bracket
  • Stainless steel pump shell, control box included with all 3-wire pumps (1/2 HP to 1 HP)
  • Built-in suction screen and check valve
  • 12 gpm and 22 gpm models available

SCHRAIBERPUMP 4" SUBMERSIBLE DEEP WELL PUMP STAINLESS STEEL IMPELLERS - 3HP - 708 FT - 21 GPM - 230V - MODEL 4S3232M - 100% COPPER WINDING - INCLUDES WIRE SPLICE KIT

Features

  • Submersible Deep Well Pump.
  • Premium line featuring stainless steel impellers.
  • 30% more pressure than regular plastic impellers using the same horse power.
  • For 4" casings and bigger diameter.
  • 2 Years Warranty.

PWS 48V 540 Watts Stainless Steel 316 Submersible Solar Water Well Pump Kit,, JS3-2.1-120

Features

  • ESSENTIAL PARAMETER: Solar water pump, 0.7HP, 48v DC, 390ft, 9GPM, 3/4” size stainless steel deep well submersible pump, durable for home and industrial use
  • SOLAR ENERGY: The deep well submersible pump can be supported by batteries if you need the flexibility of pumping on demand at any time. Moreover, it is suggested to be connected with solar panel (not included), which is high energy conversion rate, environmental-friendly and lower consumption
  • WATER SHORTAGE SENSERS: Sensors are included so the pumping system can be fully automated. With sensors installed, the well pump will switch off if the header tank is full or if the water source has fallen below the well pump intake
  • MPPT CONTROLLER: The solar water pump controller drives the high efficient brush-less DC pump motor, utilizing the latest MPPT technology to ensure maximum flow is delivered under all light conditions. It also protects the submersible pump from frequent start up in low light conditions, overheating & running dry
  • 100% SATISFIED SERVICE: We are glad to receive more suggestions from our customers, if the deep well pumps have problems, we will process any request from customer with 24 hours, and replacement will be paid by us for any quality issues

SCHRAIBERPUMP 4" SUBMERSIBLE DEEP WELL PUMP STAINLESS STEEL IMPELLERS - 2HP - 95 FT - 92 GPM - 230V - MODEL 4S14032M - 100% COPPER WINDING - INCLUDES WIRE SPLICE KIT

Features

  • Submersible Deep Well Pump.
  • Premium line featuring stainless steel impellers.
  • 30% more pressure than regular plastic impellers using the same horse power.
  • For 4" casings and greater diameter.
  • 2 Years Warranty.

Red Lion 14942409 RL22G10-3W2V Submersible Deep Well Pump with Control Box, 26.75"H, Gray

Features

  • Powered by industry standard 2- or 3-wire motors
  • Thermoplastic discharge and motor bracket
  • Stainless steel pump shell, control box included with all 3-wire pumps (1/2 HP to 1 HP)
  • Built-in suction screen and check valve
  • 12 gpm and 22 gpm models available

GOULDS Pumps GT15 IRRI-Gator Self-Priming Single Phase Centrifugal Pump, 1.5 hp, Blue

Features

  • Self-Priming Design
  • Fully Serviceable
  • FDA Compliant Impeller
  • Corrosion Resistant
  • Powered for Continuous Operation

Tuhorse 2 HP 4" Submersible Well Pump Complete Set Incl Motor, Pump-end and Control Box. 450ft Maxhead, Rated 15gpm, 22gpm Max. 1-phase 230v, 60Hz, 1.5kw, 3450 rpm, 1 Year Warranty. (TH4-015-12)

Features

  • Just slightly under 4” diameter, fits 4" and larger wells
  • 1.25 inch NPT brass outlet (discharge) with built-in check valve
  • 12 Stages. Cut off head 450 feet. Max flow(5 - 125ft): 22GPM, rated 15GPM
  • Metal cased control box includes a 100uF start and 30uF run capacitor
  • Meets NEMA industrial standards, manufactured under ISO 9001:2000, conforms to IEC34-ICE standards.

Red Lion 14942403 RL12G07-2W2V 3/4-HP 12-GPM 2-Wire Submersible Deep Well Pump, 230 Volts, Black

Features

  • Powered by industry standard 2- or 3-wire motors
  • Thermoplastic discharge and motor bracket
  • Stainless steel pump shell, control box included with all 3-wire pumps (1/2 HP to 1 HP)
  • Built-in suction screen and check valve
  • 12 gpm and 22 gpm models available

Table of Contents