



Top 50 Best Megger Tester Products Features
Features
- Price For: Each
Features
- 30 Teraohm maximum resistance
- PI, DAR, DD, SV and ramp test
- Operate from battery or AC source
- Rapid charge lithium-ion battery
- Safety rated CATIV 1000 V
Features
- MIT1525-US Insulation Tester 15kV IRT, IR, IR(t), DAR, PI, DD, SV, Ramp, USB, US plug
- 15 kV max. test voltage
- 6 mA noise rejection - 3 mA S/C current
- Safety: CATIV 1000V rated to 3000 m
- Always ready to test - Dual Li-ion batteries or AC supply
Features
- Price For: Each
Megger MIT1025-US Insulation Tester with Output, 20 Teraohms Resistance, 10kV Multi-Range Test Voltage

Features
- Insulation resistance meter measures voltage, current, capacitance, and insulation resistance in high-voltage electrical equipment
- Multiranging digital meter performs timed IR, PI, DAR, DD, SV, and ramp tests
- Memory includes time/date stamping of results, data logging, and USB download
- Measures insulation resistance from 10 kilohms to 20 teraohms, voltage from 30 to 660V AC/DC, current from 0.01nA to 6mA, and capacitance from 10nF to 25 microfarads
- Safety rated to European Standard 61010-1 Category IV, 600V and is rated to IP65 to be dust-tight and protected against jets of water
Features
- MIT1025-US Insulation Tester 10kV IRT, IR, IR(t), DAR, PI, DD, SV, Ramp, USB, US plug
- Output voltage maximum 10kV
- Resistance range max 20TΩ
- Accuracy +-5% ≤ 2TΩ/+-20%to20TΩ
- Smaller size and lighter weight
Features
- MIT525-US Insulation Tester 5kV IRT, IR, IR(t), DAR, PI, DD, SV, Ramp, USB, US plug
- Output voltage maximum 5kV
- Resistance range max 10TΩ
- Smaller size and lighter weight allows easier transport and use without compromising performance.
- Timed IR plus PI, DAR, DD, SV and ramp tests maximize diagnostic testing capability.
MIT525-US Insulation Tester with Output, 10 T Ohm Resistance, 5kV Multi-Range Test Voltage with a NIST-Traceable Calibration Certificate with Data

Features
- Your unit is calibrated prior to shipment with a new NIST-traceable calibration Certificate with data
- The NIST calibration provides you assurance your instrument meets manufacturer’s specifications. Your instrument is ready to use day one meeting most quality system standards
- Memory includes time/date stamping of results, data logging, and USB download
- Insulation resistance meter measures voltage, current, capacitance, and insulation resistance in high-voltage electrical equipment
- Digital meter performs timed IR, PI, DAR, DD, SV, and ramp tests
Megger MIT515-US Insulation Tester, 10 Teraohms Resistance, 5kV Multi-Range Test Voltage

Features
- Insulation resistance meter measures voltage, current, capacitance, and insulation resistance in high-voltage electrical equipment
- Multiranging digital meter performs timed IR, PI, and DAR
- Memory includes time/date stamping of results and data logging
- Measures insulation resistance from 10 kilohms to 10 teraohms, voltage from 30 to 660V AC/DC, current from 0.01nA to 6mA, and capacitance from 10nF to 25 microfarads
- Safety rated to European Standard 61010-1 Category IV, 600V and is rated to IP65 to be dust-tight and protected against jets of water
Features
- MIT515-US Insulation Tester 5kV IRT, IR, IR(t), DAR, PI, US plug
- Measures up to 10 TΩ
- Selectable test voltage from 250 to 5000 V
- PI, DAR, DD test
- Improved productivity - operate from line power/mains if battery dead
Features
- Price For: Each
Features
- Dielectric Test Set, 4kVAC/5kVDC, 120VAC, 50/60HZ,10ft Leads, Analog Meters, NON CE
- 4 kV AC/5 kV DC Hipot; 12.3 mA
- Front-panel adjustable leakage current trip from 0.3 to 12 mA
- One-second or continuous testing
- Automatic failure shutdown, with visual and audible alarms
Features
- Insulation tester measures insulation resistance and voltage in electrical and telecom systems
- Analog meter with manual test voltage selection
- Four test voltage options at 500, 1,000, 2,500, and 5,000V
- Measures insulation resistance from 100 kilohms to 20 gigaohms and voltage from 0 to 600V AC
- Safety rated to European Standard EN61010-1 Category III, 300V and Category I, 600V
Megger DET4TCR2+Kit 4-Terminal Ground Resistance Tester Kit with Cable Reels, Spikes, Clamps and Rechargeable Battery, 0.01-200,000 Ohms Resistance Range

Features
- Ground resistance tester and professional ground testing kit measures earth ground resistance, soil resistivity, and ground voltage to evaluate electrical system safety
- Choice of 2-, 3-, or 4- pole ground resistance testing
- Attached rod technique (ART) capability tests on-site grounds without requiring the utility connection to be disconnected, and can be used for fall-of-potential measurements
- Comes with a current clamp for measuring conductor current and electrode resistance and a voltage clamp for stakeless ground measurements
- Meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for category IV installations up to 100V
Features
- PAT450-US Portable Appliance Tester 1500V/3kV FLASH TEST, Mem/d.load 200mA + 10A + 23A Bond (Mains powered - 110V) - US
- 10,000-record on-board memory
- Large 5.7 in. VGA backlit full color screen
- 200 mA; 10 A and 25 A bond test with high duty cycle
- Selectable PASS/FAIL limits
Features
- Dielectric Test Set, 3kVAC, 120VAC, 50/60HZ, 10ft Leads, Analog Meters, NON CE
- Ground continuity check of three-wire devices with high-voltage interlock
- Front-panel adjustable leakage current trip from 0.3 to 12 mA
- One-second or continuous testing
- Automatic failure shutdown, with visual and audible alarms
Features
- Digital insulation testing up to 5000 volts
- Programmable test voltages
- Auto calculation of Dielectric Absorption and Polarization Index test
Features
- 5 test ranges; 250 V, 500 V, 1000 V, 2500 V, 5000
- 1 TΩ, 1.4 mA, 5 kV digital insulation tester
- Guard terminal to shunt surface leakage
- Selectable DC or AC Volts including frequency
- CATIII 600 V safety rating
Features
- Product type: tester
- Made in great britain
- Manufactured by Megger
- Package Dimensions: 15.2" L x 11.25" W x 8.75" H
Features
- MIT2500-LG2 (EN ES PT IT) Insulation and Continuity tester 50/100/250/500/1000/2.5kV + Guard+ Variable voltage + PAR/PI + Storage and Bluetooth Download with Language Group LG2 - English, Spanish, Portuguese and Italian
- Insulation testing up to 2.5 kV and 200 GΩ range in a hand held instrument
- Guard terminal for high resistance accuracy
- Adjustable insulation test voltage from 50 V to 2500 V
- Stabilized insulation test voltage
Features
- 210170 - Analogue Insulation Tester 100/250/500/1000 V with 5 kOhm range, reads to 20 G Ohm, Hand Cranked
- Guard terminal to eliminate surface leakage current from the measurement
- High-resistance readings up to 20,000 MΩ (analog model)
- Multiple test voltages
Features
- Extremely easy to use
- 3 Year Warranty
- Tough rubber armored case
- Self contained protective cover
- Live circuit warning
Megger 210170 Analog Hand-Crank Insulation Resistance Tester, 20,000 Megaohms Resistance, 100, 250, 500, 1000 V Test Voltage

Features
- Insulation tester for measuring insulation resistance and voltage
- Average-sensing meter provides accurate readings when measuring linear loads, where the current or voltage has a sinusoidal waveform
- Analog meter with manual range selection for flexibility of use
- Guard terminal to eliminate surface current leakage
- Safety rated to European Standard EN61010-1 Category II, 300V and Category I, 600V
Features
- Insulation resistance tester for measuring insulation resistance and voltage in electrical and telecom systems
- Powered by a hand-cranked generator or batteries so it always has power
- Four test voltage options at 500, 1,000, 2,500, and 5,000V
- Measures insulation resistance from 100 kilohms to 20 gigaohms and voltage from 0 to 600V AC
- Safety rated to European Standard EN61010-1 Category III, 300V and Category I, 600V
Megger 212159 Analog Hand-Crank Insulation Tester, 2,000 Megaohms Resistance, 100, 250, 500, 1000 V Test Voltage

Features
- Insulation tester for measuring insulation resistance and voltage
- Average-sensing meter provides accurate readings when measuring linear loads, where the current or voltage has a sinusoidal waveform
- Analog meter with manual range selection for flexibility of use
- Guard terminal to eliminate surface current leakage
- Safety rated to European Standard EN61010-1 Category II, 300V and Category I, 600V
Table of Contents