Top 25 Best Cell Phone Booster For Bell Review

Best Cell Phone Booster For Bell Products Details

GigaMIMO16-5G MIMO 2x2 and 4x4 Antenna for Bell E8372 Hotspot Turbo Stick Outdoor/Marine Omnidirectional Ultra High Gain ±45° Pol Enclosed

Features

  • The GigaMIMO16-5G™ is a powerful, innovative, omnidirectional, ultra-efficient MIMO 2x2 and 4x4 antenna perfect for situations where aiming at a service provider location is not possible, such as in vehicles, vessels, in-field setups, etc.
  • The GigaMIMO16-5G™ elements are sealed into anti-UV high-quality ABS plastic for top performance independently of weather conditions. This set, made for enhancing the Bell E8372 Hotspot Turbo Stick signal strength and data throughput, includes the GigaMIMO16-5G™, ultra-wide band combiners, and 30 feet of ultra-low loss coaxial cables for direct connection to the Bell E8372 Hotspot Turbo Stick.
  • The GigaMIMO16-5G™ is made of eight antennas at the +45° polarization and another eight at the 45° polarization), and is perfect for your Bell E8372 Hotspot Turbo Stick as it supports all its frequency bands and modes of operation.
  • The GigaMIMO16-5G™ operating frequency range is 450-6000 MHz with a peak gain of (varies) dBi*, a horizontal aperture of 360° and a vertical aperture of 30°. This GigaMIMO16-5G™ system is made for the Bell E8372 Hotspot Turbo Stick (SKU NA-BEL-E8372-GM165G) and is mainly recommended for Outdoors (Pole) applications.
  • *Gain in dBi values are average increases obtained by comparing the standard/internal device antenna to a properly-installed GigaMIMO16-5G™ located substantially higher than the Bell E8372 Hotspot Turbo Stick location. The GigaMIMO16-5G™ itself measures 37.2 x 61 x 37.2 inches and weighs 37 lbs. One year manufacturer warranty included. Patent pending.

GigaMIMO16-5G MIMO 2x2 and 4x4 Antenna for Bell U330 Turbo Stick Outdoor/Marine Omnidirectional Ultra High Gain ±45° Pol Enclosed

Features

  • The GigaMIMO16-5G™ is a powerful, innovative, omnidirectional, ultra-efficient MIMO 2x2 and 4x4 antenna perfect for situations where aiming at a service provider location is not possible, such as in vehicles, vessels, in-field setups, etc.
  • The GigaMIMO16-5G™ elements are sealed into anti-UV high-quality ABS plastic for top performance independently of weather conditions. This set, made for enhancing the Bell U330 Turbo Stick signal strength and data throughput, includes the GigaMIMO16-5G™, ultra-wide band combiners, and 30 feet of ultra-low loss coaxial cables for direct connection to the Bell U330 Turbo Stick.
  • The GigaMIMO16-5G™ is made of eight antennas at the +45° polarization and another eight at the 45° polarization), and is perfect for your Bell U330 Turbo Stick as it supports all its frequency bands and modes of operation.
  • The GigaMIMO16-5G™ operating frequency range is 450-6000 MHz with a peak gain of (varies) dBi*, a horizontal aperture of 360° and a vertical aperture of 30°. This GigaMIMO16-5G™ system is made for the Bell U330 Turbo Stick (SKU NA-BEL-U330-GM165G) and is mainly recommended for Outdoors (Pole) applications.
  • *Gain in dBi values are average increases obtained by comparing the standard/internal device antenna to a properly-installed GigaMIMO16-5G™ located substantially higher than the Bell U330 Turbo Stick location. The GigaMIMO16-5G™ itself measures 37.2 x 61 x 37.2 inches and weighs 37 lbs. One year manufacturer warranty included. Patent pending.

GigaMIMO16-5G MIMO 2x2 and 4x4 Antenna for Bell MiFi 7000 Outdoor/Marine Omnidirectional Ultra High Gain ±45° Pol Enclosed

Features

  • The GigaMIMO16-5G™ is a powerful, innovative, omnidirectional, ultra-efficient MIMO 2x2 and 4x4 antenna perfect for situations where aiming at a service provider location is not possible, such as in vehicles, vessels, in-field setups, etc.
  • The GigaMIMO16-5G™ elements are sealed into anti-UV high-quality ABS plastic for top performance independently of weather conditions. This set, made for enhancing the Bell MiFi 7000 signal strength and data throughput, includes the GigaMIMO16-5G™, ultra-wide band combiners, and 30 feet of ultra-low loss coaxial cables for direct connection to the Bell MiFi 7000.
  • The GigaMIMO16-5G™ is made of eight antennas at the +45° polarization and another eight at the 45° polarization), and is perfect for your Bell MiFi 7000 as it supports all its frequency bands and modes of operation.
  • The GigaMIMO16-5G™ operating frequency range is 450-6000 MHz with a peak gain of (varies) dBi*, a horizontal aperture of 360° and a vertical aperture of 30°. This GigaMIMO16-5G™ system is made for the Bell MiFi 7000 (SKU NA-BEL-7000-GM165G) and is mainly recommended for Outdoors (Pole) applications.
  • *Gain in dBi values are average increases obtained by comparing the standard/internal device antenna to a properly-installed GigaMIMO16-5G™ located substantially higher than the Bell MiFi 7000 location. The GigaMIMO16-5G™ itself measures 37.2 x 61 x 37.2 inches and weighs 37 lbs. One year manufacturer warranty included. Patent pending.

GigaMIMO16-5G MIMO 2x2 and 4x4 Antenna for Bell Linkhub HH40V Outdoor/Marine Omnidirectional Ultra High Gain ±45° Pol Enclosed

Features

  • The GigaMIMO16-5G™ is a powerful, innovative, omnidirectional, ultra-efficient MIMO 2x2 and 4x4 antenna perfect for situations where aiming at a service provider location is not possible, such as in vehicles, vessels, in-field setups, etc.
  • The GigaMIMO16-5G™ elements are sealed into anti-UV high-quality ABS plastic for top performance independently of weather conditions. This set, made for enhancing the Bell Linkhub HH40V signal strength and data throughput, includes the GigaMIMO16-5G™, ultra-wide band combiners, and 30 feet of ultra-low loss coaxial cables for direct connection to the Bell Linkhub HH40V.
  • The GigaMIMO16-5G™ is made of eight antennas at the +45° polarization and another eight at the 45° polarization), and is perfect for your Bell Linkhub HH40V as it supports all its frequency bands and modes of operation.
  • The GigaMIMO16-5G™ operating frequency range is 450-6000 MHz with a peak gain of (varies) dBi*, a horizontal aperture of 360° and a vertical aperture of 30°. This GigaMIMO16-5G™ system is made for the Bell Linkhub HH40V (SKU BLL-HH40V-GM165G) and is mainly recommended for Outdoors (Pole) applications.
  • *Gain in dBi values are average increases obtained by comparing the standard/internal device antenna to a properly-installed GigaMIMO16-5G™ located substantially higher than the Bell Linkhub HH40V location. The GigaMIMO16-5G™ itself measures 37.2 x 61 x 37.2 inches and weighs 37 lbs. One year manufacturer warranty included. Patent pending.

GigaMIMO16-5G MIMO 2x2 and 4x4 Antenna for Bell MiFi 6630 Outdoor/Marine Omnidirectional Ultra High Gain ±45° Pol Enclosed

Features

  • The GigaMIMO16-5G™ is a powerful, innovative, omnidirectional, ultra-efficient MIMO 2x2 and 4x4 antenna perfect for situations where aiming at a service provider location is not possible, such as in vehicles, vessels, in-field setups, etc.
  • The GigaMIMO16-5G™ elements are sealed into anti-UV high-quality ABS plastic for top performance independently of weather conditions. This set, made for enhancing the Bell MiFi 6630 signal strength and data throughput, includes the GigaMIMO16-5G™, ultra-wide band combiners, and 30 feet of ultra-low loss coaxial cables for direct connection to the Bell MiFi 6630.
  • The GigaMIMO16-5G™ is made of eight antennas at the +45° polarization and another eight at the 45° polarization), and is perfect for your Bell MiFi 6630 as it supports all its frequency bands and modes of operation.
  • The GigaMIMO16-5G™ operating frequency range is 450-6000 MHz with a peak gain of (varies) dBi*, a horizontal aperture of 360° and a vertical aperture of 30°. This GigaMIMO16-5G™ system is made for the Bell MiFi 6630 (SKU NA-BEL-6630-GM165G) and is mainly recommended for Outdoors (Pole) applications.
  • *Gain in dBi values are average increases obtained by comparing the standard/internal device antenna to a properly-installed GigaMIMO16-5G™ located substantially higher than the Bell MiFi 6630 location. The GigaMIMO16-5G™ itself measures 37.2 x 61 x 37.2 inches and weighs 37 lbs. One year manufacturer warranty included. Patent pending.

GigaMIMO16-5G MIMO 2x2 and 4x4 Antenna for Bell MBR1516 Turbo Hub Outdoor/Marine Omnidirectional Ultra High Gain ±45° Pol Enclosed

Features

  • The GigaMIMO16-5G™ is a powerful, innovative, omnidirectional, ultra-efficient MIMO 2x2 and 4x4 antenna perfect for situations where aiming at a service provider location is not possible, such as in vehicles, vessels, in-field setups, etc.
  • The GigaMIMO16-5G™ elements are sealed into anti-UV high-quality ABS plastic for top performance independently of weather conditions. This set, made for enhancing the Bell MBR1516 Turbo Hub signal strength and data throughput, includes the GigaMIMO16-5G™, ultra-wide band combiners, and 30 feet of ultra-low loss coaxial cables for direct connection to the Bell MBR1516 Turbo Hub.
  • The GigaMIMO16-5G™ is made of eight antennas at the +45° polarization and another eight at the 45° polarization), and is perfect for your Bell MBR1516 Turbo Hub as it supports all its frequency bands and modes of operation.
  • The GigaMIMO16-5G™ operating frequency range is 450-6000 MHz with a peak gain of (varies) dBi*, a horizontal aperture of 360° and a vertical aperture of 30°. This GigaMIMO16-5G™ system is made for the Bell MBR1516 Turbo Hub (SKU NA-BELL-MBR1516-GM165G) and is mainly recommended for Outdoors (Pole) applications.
  • *Gain in dBi values are average increases obtained by comparing the standard/internal device antenna to a properly-installed GigaMIMO16-5G™ located substantially higher than the Bell MBR1516 Turbo Hub location. The GigaMIMO16-5G™ itself measures 37.2 x 61 x 37.2 inches and weighs 37 lbs. One year manufacturer warranty included. Patent pending.

GigaMIMO16-5G MIMO 2x2 and 4x4 Antenna for Bell MF288 Turbo Hub Outdoor/Marine Omnidirectional Ultra High Gain ±45° Pol Enclosed

Features

  • The GigaMIMO16-5G™ is a powerful, innovative, omnidirectional, ultra-efficient MIMO 2x2 and 4x4 antenna perfect for situations where aiming at a service provider location is not possible, such as in vehicles, vessels, in-field setups, etc.
  • The GigaMIMO16-5G™ elements are sealed into anti-UV high-quality ABS plastic for top performance independently of weather conditions. This set, made for enhancing the Bell MF288 Turbo Hub signal strength and data throughput, includes the GigaMIMO16-5G™, ultra-wide band combiners, and 30 feet of ultra-low loss coaxial cables for direct connection to the Bell MF288 Turbo Hub.
  • The GigaMIMO16-5G™ is made of eight antennas at the +45° polarization and another eight at the 45° polarization), and is perfect for your Bell MF288 Turbo Hub as it supports all its frequency bands and modes of operation.
  • The GigaMIMO16-5G™ operating frequency range is 450-6000 MHz with a peak gain of (varies) dBi*, a horizontal aperture of 360° and a vertical aperture of 30°. This GigaMIMO16-5G™ system is made for the Bell MF288 Turbo Hub (SKU NA-BEL-MF288-GM165G) and is mainly recommended for Outdoors (Pole) applications.
  • *Gain in dBi values are average increases obtained by comparing the standard/internal device antenna to a properly-installed GigaMIMO16-5G™ located substantially higher than the Bell MF288 Turbo Hub location. The GigaMIMO16-5G™ itself measures 37.2 x 61 x 37.2 inches and weighs 37 lbs. One year manufacturer warranty included. Patent pending.

GigaMIMO16-5G MIMO 2x2 and 4x4 Antenna for Bell AirCard 330u Outdoor/Marine Omnidirectional Ultra High Gain ±45° Pol Enclosed

Features

  • The GigaMIMO16-5G™ is a powerful, innovative, omnidirectional, ultra-efficient MIMO 2x2 and 4x4 antenna perfect for situations where aiming at a service provider location is not possible, such as in vehicles, vessels, in-field setups, etc.
  • The GigaMIMO16-5G™ elements are sealed into anti-UV high-quality ABS plastic for top performance independently of weather conditions. This set, made for enhancing the Bell AirCard 330u signal strength and data throughput, includes the GigaMIMO16-5G™, ultra-wide band combiners, and 30 feet of ultra-low loss coaxial cables for direct connection to the Bell AirCard 330u.
  • The GigaMIMO16-5G™ is made of eight antennas at the +45° polarization and another eight at the 45° polarization), and is perfect for your Bell AirCard 330u as it supports all its frequency bands and modes of operation.
  • The GigaMIMO16-5G™ operating frequency range is 450-6000 MHz with a peak gain of (varies) dBi*, a horizontal aperture of 360° and a vertical aperture of 30°. This GigaMIMO16-5G™ system is made for the Bell AirCard 330u (SKU NA-BEL-330U-GM165G) and is mainly recommended for Outdoors (Pole) applications.
  • *Gain in dBi values are average increases obtained by comparing the standard/internal device antenna to a properly-installed GigaMIMO16-5G™ located substantially higher than the Bell AirCard 330u location. The GigaMIMO16-5G™ itself measures 37.2 x 61 x 37.2 inches and weighs 37 lbs. One year manufacturer warranty included. Patent pending.

GigaMIMO16-5G MIMO 2x2 and 4x4 Antenna for Bell AirCard 313u Outdoor/Marine Omnidirectional Ultra High Gain ±45° Pol Enclosed

Features

  • The GigaMIMO16-5G™ is a powerful, innovative, omnidirectional, ultra-efficient MIMO 2x2 and 4x4 antenna perfect for situations where aiming at a service provider location is not possible, such as in vehicles, vessels, in-field setups, etc.
  • The GigaMIMO16-5G™ elements are sealed into anti-UV high-quality ABS plastic for top performance independently of weather conditions. This set, made for enhancing the Bell AirCard 313u signal strength and data throughput, includes the GigaMIMO16-5G™, ultra-wide band combiners, and 30 feet of ultra-low loss coaxial cables for direct connection to the Bell AirCard 313u.
  • The GigaMIMO16-5G™ is made of eight antennas at the +45° polarization and another eight at the 45° polarization), and is perfect for your Bell AirCard 313u as it supports all its frequency bands and modes of operation.
  • The GigaMIMO16-5G™ operating frequency range is 450-6000 MHz with a peak gain of (varies) dBi*, a horizontal aperture of 360° and a vertical aperture of 30°. This GigaMIMO16-5G™ system is made for the Bell AirCard 313u (SKU NA-BEL-313U-GM165G) and is mainly recommended for Outdoors (Pole) applications.
  • *Gain in dBi values are average increases obtained by comparing the standard/internal device antenna to a properly-installed GigaMIMO16-5G™ located substantially higher than the Bell AirCard 313u location. The GigaMIMO16-5G™ itself measures 37.2 x 61 x 37.2 inches and weighs 37 lbs. One year manufacturer warranty included. Patent pending.

GigaMIMO16-5G MIMO 2x2 and 4x4 Antenna for Bell AirCard 763s Outdoor/Marine Omnidirectional Ultra High Gain ±45° Pol Enclosed

Features

  • The GigaMIMO16-5G™ is a powerful, innovative, omnidirectional, ultra-efficient MIMO 2x2 and 4x4 antenna perfect for situations where aiming at a service provider location is not possible, such as in vehicles, vessels, in-field setups, etc.
  • The GigaMIMO16-5G™ elements are sealed into anti-UV high-quality ABS plastic for top performance independently of weather conditions. This set, made for enhancing the Bell AirCard 763s signal strength and data throughput, includes the GigaMIMO16-5G™, ultra-wide band combiners, and 30 feet of ultra-low loss coaxial cables for direct connection to the Bell AirCard 763s.
  • The GigaMIMO16-5G™ is made of eight antennas at the +45° polarization and another eight at the 45° polarization), and is perfect for your Bell AirCard 763s as it supports all its frequency bands and modes of operation.
  • The GigaMIMO16-5G™ operating frequency range is 450-6000 MHz with a peak gain of (varies) dBi*, a horizontal aperture of 360° and a vertical aperture of 30°. This GigaMIMO16-5G™ system is made for the Bell AirCard 763s (SKU NA-BELL-763S-GM165G) and is mainly recommended for Outdoors (Pole) applications.
  • *Gain in dBi values are average increases obtained by comparing the standard/internal device antenna to a properly-installed GigaMIMO16-5G™ located substantially higher than the Bell AirCard 763s location. The GigaMIMO16-5G™ itself measures 37.2 x 61 x 37.2 inches and weighs 37 lbs. One year manufacturer warranty included. Patent pending.

GigaMIMO-5G Ultra High Gain 5G/4G/3G Outdoor/Marine MIMO/Dual Antenna for Bell U330 Turbo Stick Omnidirectional Diversity/Aux Enclosed ±45° Polarization

Features

  • This GigaMIMO-5G™ set will connect directly to the Bell U330 Turbo Stick, taking full advantage of its advanced MIMO feature (±45° polarizations as per MIMO standards) and is especially suitable for the marine environment.
  • The GigaMIMO-5G™ gain power comes from the employment of eight state of the art 5G antennas and high-efficiency combiners. The GigaMIMO-5G™ by WirEng® is a true 5G antenna because it covers all 5G cellular bands between 450 MHz and 6 GHz.
  • The GigaMIMO-5G™ now features 24K gold plated connectors and stainless steel mounts and back shields, for even higher performance and strength, and supports all cellular/data carriers worldwide. The GigaMIMO-5G™ is great for ultra-carrier aggregation modems/routers and is also suitable as a rooftop antenna or for newscasting, camping, emergency response teams, etc.
  • The GigaMIMO-5G™ operating frequency range is 450-6000 MHz with a peak gain of (varies) dBi*, a horizontal aperture of 360° and a vertical aperture of 60°. This GigaMIMO-5G™ system is made for the Bell U330 Turbo Stick (SKU NA-BEL-U330-GM5G) and is mainly recommended for Outdoors (Pole) applications.
  • *Gain in dBi values are average increases obtained by comparing the standard/internal device antenna to a properly-installed GigaMIMO-5G™ located substantially higher than the Bell U330 Turbo Stick location. The GigaMIMO-5G™ itself measures 37.2 x 30.5 x 37.2 inches and weighs 18.6 lbs. One year manufacturer warranty included. Patent pending.

GigaMIMO-5G Ultra High Gain 5G/4G/3G Outdoor/Marine MIMO/Dual Antenna for Bell E8372 Hotspot Turbo Stick Omnidirectional Diversity/Aux Enclosed ±45° Polarization

Features

  • This GigaMIMO-5G™ set will connect directly to the Bell E8372 Hotspot Turbo Stick, taking full advantage of its advanced MIMO feature (±45° polarizations as per MIMO standards) and is especially suitable for the marine environment.
  • The GigaMIMO-5G™ gain power comes from the employment of eight state of the art 5G antennas and high-efficiency combiners. The GigaMIMO-5G™ by WirEng® is a true 5G antenna because it covers all 5G cellular bands between 450 MHz and 6 GHz.
  • The GigaMIMO-5G™ now features 24K gold plated connectors and stainless steel mounts and back shields, for even higher performance and strength, and supports all cellular/data carriers worldwide. The GigaMIMO-5G™ is great for ultra-carrier aggregation modems/routers and is also suitable as a rooftop antenna or for newscasting, camping, emergency response teams, etc.
  • The GigaMIMO-5G™ operating frequency range is 450-6000 MHz with a peak gain of (varies) dBi*, a horizontal aperture of 360° and a vertical aperture of 60°. This GigaMIMO-5G™ system is made for the Bell E8372 Hotspot Turbo Stick (SKU NA-BEL-E8372-GM5G) and is mainly recommended for Outdoors (Pole) applications.
  • *Gain in dBi values are average increases obtained by comparing the standard/internal device antenna to a properly-installed GigaMIMO-5G™ located substantially higher than the Bell E8372 Hotspot Turbo Stick location. The GigaMIMO-5G™ itself measures 37.2 x 30.5 x 37.2 inches and weighs 18.6 lbs. One year manufacturer warranty included. Patent pending.

GigaMIMO-5G Ultra High Gain 5G/4G/3G Outdoor/Marine MIMO/Dual Antenna for Bell MiFi 7000 Omnidirectional Diversity/Aux Enclosed ±45° Polarization

Features

  • This GigaMIMO-5G™ set will connect directly to the Bell MiFi 7000, taking full advantage of its advanced MIMO feature (±45° polarizations as per MIMO standards) and is especially suitable for the marine environment.
  • The GigaMIMO-5G™ gain power comes from the employment of eight state of the art 5G antennas and high-efficiency combiners. The GigaMIMO-5G™ by WirEng® is a true 5G antenna because it covers all 5G cellular bands between 450 MHz and 6 GHz.
  • The GigaMIMO-5G™ now features 24K gold plated connectors and stainless steel mounts and back shields, for even higher performance and strength, and supports all cellular/data carriers worldwide. The GigaMIMO-5G™ is great for ultra-carrier aggregation modems/routers and is also suitable as a rooftop antenna or for newscasting, camping, emergency response teams, etc.
  • The GigaMIMO-5G™ operating frequency range is 450-6000 MHz with a peak gain of (varies) dBi*, a horizontal aperture of 360° and a vertical aperture of 60°. This GigaMIMO-5G™ system is made for the Bell MiFi 7000 (SKU NA-BEL-7000-GM5G) and is mainly recommended for Outdoors (Pole) applications.
  • *Gain in dBi values are average increases obtained by comparing the standard/internal device antenna to a properly-installed GigaMIMO-5G™ located substantially higher than the Bell MiFi 7000 location. The GigaMIMO-5G™ itself measures 37.2 x 30.5 x 37.2 inches and weighs 18.6 lbs. One year manufacturer warranty included. Patent pending.

GigaMIMO-5G Ultra High Gain 5G/4G/3G Outdoor/Marine MIMO/Dual Antenna for Bell Linkhub HH40V Omnidirectional Diversity/Aux Enclosed ±45° Polarization

Features

  • This GigaMIMO-5G™ set will connect directly to the Bell Linkhub HH40V, taking full advantage of its advanced MIMO feature (±45° polarizations as per MIMO standards) and is especially suitable for the marine environment.
  • The GigaMIMO-5G™ gain power comes from the employment of eight state of the art 5G antennas and high-efficiency combiners. The GigaMIMO-5G™ by WirEng® is a true 5G antenna because it covers all 5G cellular bands between 450 MHz and 6 GHz.
  • The GigaMIMO-5G™ now features 24K gold plated connectors and stainless steel mounts and back shields, for even higher performance and strength, and supports all cellular/data carriers worldwide. The GigaMIMO-5G™ is great for ultra-carrier aggregation modems/routers and is also suitable as a rooftop antenna or for newscasting, camping, emergency response teams, etc.
  • The GigaMIMO-5G™ operating frequency range is 450-6000 MHz with a peak gain of (varies) dBi*, a horizontal aperture of 360° and a vertical aperture of 60°. This GigaMIMO-5G™ system is made for the Bell Linkhub HH40V (SKU BLL-HH40V-GM5G) and is mainly recommended for Outdoors (Pole) applications.
  • *Gain in dBi values are average increases obtained by comparing the standard/internal device antenna to a properly-installed GigaMIMO-5G™ located substantially higher than the Bell Linkhub HH40V location. The GigaMIMO-5G™ itself measures 37.2 x 30.5 x 37.2 inches and weighs 18.6 lbs. One year manufacturer warranty included. Patent pending.

GigaMIMO-5G Ultra High Gain 5G/4G/3G Outdoor/Marine MIMO/Dual Antenna for Bell MiFi 6630 Omnidirectional Diversity/Aux Enclosed ±45° Polarization

Features

  • This GigaMIMO-5G™ set will connect directly to the Bell MiFi 6630, taking full advantage of its advanced MIMO feature (±45° polarizations as per MIMO standards) and is especially suitable for the marine environment.
  • The GigaMIMO-5G™ gain power comes from the employment of eight state of the art 5G antennas and high-efficiency combiners. The GigaMIMO-5G™ by WirEng® is a true 5G antenna because it covers all 5G cellular bands between 450 MHz and 6 GHz.
  • The GigaMIMO-5G™ now features 24K gold plated connectors and stainless steel mounts and back shields, for even higher performance and strength, and supports all cellular/data carriers worldwide. The GigaMIMO-5G™ is great for ultra-carrier aggregation modems/routers and is also suitable as a rooftop antenna or for newscasting, camping, emergency response teams, etc.
  • The GigaMIMO-5G™ operating frequency range is 450-6000 MHz with a peak gain of (varies) dBi*, a horizontal aperture of 360° and a vertical aperture of 60°. This GigaMIMO-5G™ system is made for the Bell MiFi 6630 (SKU NA-BEL-6630-GM5G) and is mainly recommended for Outdoors (Pole) applications.
  • *Gain in dBi values are average increases obtained by comparing the standard/internal device antenna to a properly-installed GigaMIMO-5G™ located substantially higher than the Bell MiFi 6630 location. The GigaMIMO-5G™ itself measures 37.2 x 30.5 x 37.2 inches and weighs 18.6 lbs. One year manufacturer warranty included. Patent pending.

GigaMIMO-5G Ultra High Gain 5G/4G/3G Outdoor/Marine MIMO/Dual Antenna for Bell MF288 Turbo Hub Omnidirectional Diversity/Aux Enclosed ±45° Polarization

Features

  • This GigaMIMO-5G™ set will connect directly to the Bell MF288 Turbo Hub, taking full advantage of its advanced MIMO feature (±45° polarizations as per MIMO standards) and is especially suitable for the marine environment.
  • The GigaMIMO-5G™ gain power comes from the employment of eight state of the art 5G antennas and high-efficiency combiners. The GigaMIMO-5G™ by WirEng® is a true 5G antenna because it covers all 5G cellular bands between 450 MHz and 6 GHz.
  • The GigaMIMO-5G™ now features 24K gold plated connectors and stainless steel mounts and back shields, for even higher performance and strength, and supports all cellular/data carriers worldwide. The GigaMIMO-5G™ is great for ultra-carrier aggregation modems/routers and is also suitable as a rooftop antenna or for newscasting, camping, emergency response teams, etc.
  • The GigaMIMO-5G™ operating frequency range is 450-6000 MHz with a peak gain of (varies) dBi*, a horizontal aperture of 360° and a vertical aperture of 60°. This GigaMIMO-5G™ system is made for the Bell MF288 Turbo Hub (SKU NA-BEL-MF288-GM5G) and is mainly recommended for Outdoors (Pole) applications.
  • *Gain in dBi values are average increases obtained by comparing the standard/internal device antenna to a properly-installed GigaMIMO-5G™ located substantially higher than the Bell MF288 Turbo Hub location. The GigaMIMO-5G™ itself measures 37.2 x 30.5 x 37.2 inches and weighs 18.6 lbs. One year manufacturer warranty included. Patent pending.

GigaMIMO-5G Ultra High Gain 5G/4G/3G Outdoor/Marine MIMO/Dual Antenna for Bell MBR1516 Turbo Hub Omnidirectional Diversity/Aux Enclosed ±45° Polarization

Features

  • This GigaMIMO-5G™ set will connect directly to the Bell MBR1516 Turbo Hub, taking full advantage of its advanced MIMO feature (±45° polarizations as per MIMO standards) and is especially suitable for the marine environment.
  • The GigaMIMO-5G™ gain power comes from the employment of eight state of the art 5G antennas and high-efficiency combiners. The GigaMIMO-5G™ by WirEng® is a true 5G antenna because it covers all 5G cellular bands between 450 MHz and 6 GHz.
  • The GigaMIMO-5G™ now features 24K gold plated connectors and stainless steel mounts and back shields, for even higher performance and strength, and supports all cellular/data carriers worldwide. The GigaMIMO-5G™ is great for ultra-carrier aggregation modems/routers and is also suitable as a rooftop antenna or for newscasting, camping, emergency response teams, etc.
  • The GigaMIMO-5G™ operating frequency range is 450-6000 MHz with a peak gain of (varies) dBi*, a horizontal aperture of 360° and a vertical aperture of 60°. This GigaMIMO-5G™ system is made for the Bell MBR1516 Turbo Hub (SKU NA-BELL-MBR1516-GM5G) and is mainly recommended for Outdoors (Pole) applications.
  • *Gain in dBi values are average increases obtained by comparing the standard/internal device antenna to a properly-installed GigaMIMO-5G™ located substantially higher than the Bell MBR1516 Turbo Hub location. The GigaMIMO-5G™ itself measures 37.2 x 30.5 x 37.2 inches and weighs 18.6 lbs. One year manufacturer warranty included. Patent pending.

GigaMIMO-5G Ultra High Gain 5G/4G/3G Outdoor/Marine MIMO/Dual Antenna for Bell AirCard 330u Omnidirectional Diversity/Aux Enclosed ±45° Polarization

Features

  • This GigaMIMO-5G™ set will connect directly to the Bell AirCard 330u, taking full advantage of its advanced MIMO feature (±45° polarizations as per MIMO standards) and is especially suitable for the marine environment.
  • The GigaMIMO-5G™ gain power comes from the employment of eight state of the art 5G antennas and high-efficiency combiners. The GigaMIMO-5G™ by WirEng® is a true 5G antenna because it covers all 5G cellular bands between 450 MHz and 6 GHz.
  • The GigaMIMO-5G™ now features 24K gold plated connectors and stainless steel mounts and back shields, for even higher performance and strength, and supports all cellular/data carriers worldwide. The GigaMIMO-5G™ is great for ultra-carrier aggregation modems/routers and is also suitable as a rooftop antenna or for newscasting, camping, emergency response teams, etc.
  • The GigaMIMO-5G™ operating frequency range is 450-6000 MHz with a peak gain of (varies) dBi*, a horizontal aperture of 360° and a vertical aperture of 60°. This GigaMIMO-5G™ system is made for the Bell AirCard 330u (SKU NA-BEL-330U-GM5G) and is mainly recommended for Outdoors (Pole) applications.
  • *Gain in dBi values are average increases obtained by comparing the standard/internal device antenna to a properly-installed GigaMIMO-5G™ located substantially higher than the Bell AirCard 330u location. The GigaMIMO-5G™ itself measures 37.2 x 30.5 x 37.2 inches and weighs 18.6 lbs. One year manufacturer warranty included. Patent pending.

GigaMIMO-5G Ultra High Gain 5G/4G/3G Outdoor/Marine MIMO/Dual Antenna for Bell AirCard 763s Omnidirectional Diversity/Aux Enclosed ±45° Polarization

Features

  • This GigaMIMO-5G™ set will connect directly to the Bell AirCard 763s, taking full advantage of its advanced MIMO feature (±45° polarizations as per MIMO standards) and is especially suitable for the marine environment.
  • The GigaMIMO-5G™ gain power comes from the employment of eight state of the art 5G antennas and high-efficiency combiners. The GigaMIMO-5G™ by WirEng® is a true 5G antenna because it covers all 5G cellular bands between 450 MHz and 6 GHz.
  • The GigaMIMO-5G™ now features 24K gold plated connectors and stainless steel mounts and back shields, for even higher performance and strength, and supports all cellular/data carriers worldwide. The GigaMIMO-5G™ is great for ultra-carrier aggregation modems/routers and is also suitable as a rooftop antenna or for newscasting, camping, emergency response teams, etc.
  • The GigaMIMO-5G™ operating frequency range is 450-6000 MHz with a peak gain of (varies) dBi*, a horizontal aperture of 360° and a vertical aperture of 60°. This GigaMIMO-5G™ system is made for the Bell AirCard 763s (SKU NA-BELL-763S-GM5G) and is mainly recommended for Outdoors (Pole) applications.
  • *Gain in dBi values are average increases obtained by comparing the standard/internal device antenna to a properly-installed GigaMIMO-5G™ located substantially higher than the Bell AirCard 763s location. The GigaMIMO-5G™ itself measures 37.2 x 30.5 x 37.2 inches and weighs 18.6 lbs. One year manufacturer warranty included. Patent pending.

GigaMIMO-5G Ultra High Gain 5G/4G/3G Outdoor/Marine MIMO/Dual Antenna for Bell AirCard 313u Omnidirectional Diversity/Aux Enclosed ±45° Polarization

Features

  • This GigaMIMO-5G™ set will connect directly to the Bell AirCard 313u, taking full advantage of its advanced MIMO feature (±45° polarizations as per MIMO standards) and is especially suitable for the marine environment.
  • The GigaMIMO-5G™ gain power comes from the employment of eight state of the art 5G antennas and high-efficiency combiners. The GigaMIMO-5G™ by WirEng® is a true 5G antenna because it covers all 5G cellular bands between 450 MHz and 6 GHz.
  • The GigaMIMO-5G™ now features 24K gold plated connectors and stainless steel mounts and back shields, for even higher performance and strength, and supports all cellular/data carriers worldwide. The GigaMIMO-5G™ is great for ultra-carrier aggregation modems/routers and is also suitable as a rooftop antenna or for newscasting, camping, emergency response teams, etc.
  • The GigaMIMO-5G™ operating frequency range is 450-6000 MHz with a peak gain of (varies) dBi*, a horizontal aperture of 360° and a vertical aperture of 60°. This GigaMIMO-5G™ system is made for the Bell AirCard 313u (SKU NA-BEL-313U-GM5G) and is mainly recommended for Outdoors (Pole) applications.
  • *Gain in dBi values are average increases obtained by comparing the standard/internal device antenna to a properly-installed GigaMIMO-5G™ located substantially higher than the Bell AirCard 313u location. The GigaMIMO-5G™ itself measures 37.2 x 30.5 x 37.2 inches and weighs 18.6 lbs. One year manufacturer warranty included. Patent pending.

GigaMIMO MIMO/Dual Antenna for Bell U330 Turbo Stick Outdoor/Marine Omnidirectional Ultra High Gain ±45° Pol Enclosed

Features

  • The GigaMIMO™ is a powerful, innovative, omnidirectional, ultra-efficient MIMO/dual antenna perfect for situations where aiming at a service provider location is not possible, such as in vehicles, vessels, in-field setups, etc.
  • The GigaMIMO™ elements are sealed into anti-UV high-quality ABS plastic for top performance independently of weather conditions. This set, made for enhancing the Bell U330 Turbo Stick signal strength and data throughput, includes the GigaMIMO™, ultra-wide band combiners, and 30 feet of ultra-low loss dual coaxial cable for direct connection to the Bell U330 Turbo Stick.
  • The GigaMIMO™ contains two sets of independent antennas (one set with +45° polarization and the other with -45° polarization), perfect for your Bell U330 Turbo Stick as it supports all its frequency bands and modes of operation.
  • The GigaMIMO™ operating frequency range is 690-3800 MHz with a peak gain of (varies) dBi*, a horizontal aperture of 360° and a vertical aperture of 60°. This GigaMIMO™ system is made for the Bell U330 Turbo Stick (SKU NA-BEL-U330-GMI) and is mainly recommended for Outdoors (Pole) applications.
  • *Gain in dBi values are average increases obtained by comparing the standard/internal device antenna to a properly-installed GigaMIMO™ located substantially higher than the Bell U330 Turbo Stick location. The GigaMIMO™ itself measures 37.2 x 30.5 x 37.2 inches and weighs 18.6 lbs. One year manufacturer warranty included. Patent pending.

GigaMIMO MIMO/Dual Antenna for Bell E8372 Hotspot Turbo Stick Outdoor/Marine Omnidirectional Ultra High Gain ±45° Pol Enclosed

Features

  • The GigaMIMO™ is a powerful, innovative, omnidirectional, ultra-efficient MIMO/dual antenna perfect for situations where aiming at a service provider location is not possible, such as in vehicles, vessels, in-field setups, etc.
  • The GigaMIMO™ elements are sealed into anti-UV high-quality ABS plastic for top performance independently of weather conditions. This set, made for enhancing the Bell E8372 Hotspot Turbo Stick signal strength and data throughput, includes the GigaMIMO™, ultra-wide band combiners, and 30 feet of ultra-low loss dual coaxial cable for direct connection to the Bell E8372 Hotspot Turbo Stick.
  • The GigaMIMO™ contains two sets of independent antennas (one set with +45° polarization and the other with -45° polarization), perfect for your Bell E8372 Hotspot Turbo Stick as it supports all its frequency bands and modes of operation.
  • The GigaMIMO™ operating frequency range is 690-3800 MHz with a peak gain of (varies) dBi*, a horizontal aperture of 360° and a vertical aperture of 60°. This GigaMIMO™ system is made for the Bell E8372 Hotspot Turbo Stick (SKU NA-BEL-E8372-GMI) and is mainly recommended for Outdoors (Pole) applications.
  • *Gain in dBi values are average increases obtained by comparing the standard/internal device antenna to a properly-installed GigaMIMO™ located substantially higher than the Bell E8372 Hotspot Turbo Stick location. The GigaMIMO™ itself measures 37.2 x 30.5 x 37.2 inches and weighs 18.6 lbs. One year manufacturer warranty included. Patent pending.

GigaMIMO MIMO/Dual Antenna for Bell MiFi 7000 Outdoor/Marine Omnidirectional Ultra High Gain ±45° Pol Enclosed

Features

  • The GigaMIMO™ is a powerful, innovative, omnidirectional, ultra-efficient MIMO/dual antenna perfect for situations where aiming at a service provider location is not possible, such as in vehicles, vessels, in-field setups, etc.
  • The GigaMIMO™ elements are sealed into anti-UV high-quality ABS plastic for top performance independently of weather conditions. This set, made for enhancing the Bell MiFi 7000 signal strength and data throughput, includes the GigaMIMO™, ultra-wide band combiners, and 30 feet of ultra-low loss dual coaxial cable for direct connection to the Bell MiFi 7000.
  • The GigaMIMO™ contains two sets of independent antennas (one set with +45° polarization and the other with -45° polarization), perfect for your Bell MiFi 7000 as it supports all its frequency bands and modes of operation.
  • The GigaMIMO™ operating frequency range is 690-3800 MHz with a peak gain of (varies) dBi*, a horizontal aperture of 360° and a vertical aperture of 60°. This GigaMIMO™ system is made for the Bell MiFi 7000 (SKU NA-BEL-7000-GMI) and is mainly recommended for Outdoors (Pole) applications.
  • *Gain in dBi values are average increases obtained by comparing the standard/internal device antenna to a properly-installed GigaMIMO™ located substantially higher than the Bell MiFi 7000 location. The GigaMIMO™ itself measures 37.2 x 30.5 x 37.2 inches and weighs 18.6 lbs. One year manufacturer warranty included. Patent pending.

GigaMIMO MIMO/Dual Antenna for Bell Linkhub HH40V Outdoor/Marine Omnidirectional Ultra High Gain ±45° Pol Enclosed

Features

  • The GigaMIMO™ is a powerful, innovative, omnidirectional, ultra-efficient MIMO/dual antenna perfect for situations where aiming at a service provider location is not possible, such as in vehicles, vessels, in-field setups, etc.
  • The GigaMIMO™ elements are sealed into anti-UV high-quality ABS plastic for top performance independently of weather conditions. This set, made for enhancing the Bell Linkhub HH40V signal strength and data throughput, includes the GigaMIMO™, ultra-wide band combiners, and 30 feet of ultra-low loss dual coaxial cable for direct connection to the Bell Linkhub HH40V.
  • The GigaMIMO™ contains two sets of independent antennas (one set with +45° polarization and the other with -45° polarization), perfect for your Bell Linkhub HH40V as it supports all its frequency bands and modes of operation.
  • The GigaMIMO™ operating frequency range is 690-3800 MHz with a peak gain of (varies) dBi*, a horizontal aperture of 360° and a vertical aperture of 60°. This GigaMIMO™ system is made for the Bell Linkhub HH40V (SKU BLL-HH40V-GMI) and is mainly recommended for Outdoors (Pole) applications.
  • *Gain in dBi values are average increases obtained by comparing the standard/internal device antenna to a properly-installed GigaMIMO™ located substantially higher than the Bell Linkhub HH40V location. The GigaMIMO™ itself measures 37.2 x 30.5 x 37.2 inches and weighs 18.6 lbs. One year manufacturer warranty included. Patent pending.

GigaMIMO-Lite Compact MIMO/Dual Antenna for Bell Linkhub HH40V Outdoor/Marine Omnidirectional High Gain ±45° Pol Enclosed

Features

  • The GigaMIMO-Lite™ is a powerful, innovative, omnidirectional, ultra-efficient MIMO/dual antenna perfect for situations where aiming at a service provider location is not possible, such as in vehicles, vessels, in-field setups, etc.
  • The GigaMIMO-Lite™ elements are sealed into anti-UV high-quality ABS plastic for top performance independently of weather conditions. This set, made for enhancing the Bell Linkhub HH40V signal strength and data throughput, includes the GigaMIMO-Lite™, ultra-wide band combiners, and 30 feet of ultra-low loss dual coaxial cable for direct connection to the Bell Linkhub HH40V.
  • The GigaMIMO-Lite™ contains two sets of independent antennas (one set with +45° polarization and the other with -45° polarization), perfect for your Bell Linkhub HH40V as it supports all its frequency bands and modes of operation.
  • The GigaMIMO-Lite™ operating frequency range is 690-2800 MHz with a peak gain of (varies) dBi*, a horizontal aperture of 360° and a vertical aperture of 110°. This GigaMIMO-Lite™ system is made for the Bell Linkhub HH40V (SKU BLL-HH40V-GML) and is mainly recommended for Outdoors (Pole) applications.
  • *Gain in dBi values are average increases obtained by comparing the standard/internal device antenna to a properly-installed GigaMIMO-Lite™ located substantially higher than the Bell Linkhub HH40V location. The GigaMIMO-Lite™ itself measures 37.2 x 30.5 x 37.2 inches and weighs 18.6 lbs. One year manufacturer warranty included. Patent pending.

Table of Contents