Top 25 Best Shop Press Review

Best Shop Press Products Details

SP-75S 75 ton Shop Press w/ Accessory Kit

Features

  • Hydraulic Presses
  • Machining Supplies
  • Machining
  • FLEET/VEHICLE MAINT

OTC 1857 100-Ton Heavy-Duty Shop Press with Hydraulic Hand Pump

Features

  • OTC's heavy duty 100-ton capacity press features robust steel construction and wide open uprights that allow easy positioning of bars and shafts for straightening or bending operations
  • Upper bolster can be lowered for convenient positioning during repetitive jobs; press bed is easily raised or lowered with a hand crank operated cable lifting system
  • Ram head glides smoothly on rollers for easy horizontal adjustments; rugged press frame will withstand a full capacity load with the ram head in any position across the upper bolster
  • Press comes complete with No. 4008 Hydraulic Hand Pump, No. 10492 Gauge, No. 303840 Hose, No. 52434 Single Acting Hydraulic Ram with 10 inch stroke, and No. 50931 Pump Mounting Bracket
  • Unit stands 77-1/4 inches tall, 64 inches wide, and 36 inches deep; frame extension holes are on 8 inch centers; backed by OTC's Lifetime Marathon Warranty

Electric 100 Ton Hydraulic Shop Press Brake Bender Bending 3 Phase 220 Volt

Features

  • Electric 100 Ton Hydraulic Press Brake; Capacity: 100 Ton (1000kn)
  • Cylinder Max Pressure 32MPA, TONNAGE: 1005KN; Hydraulic Motor: *220 Volt *3 KW *1720 RPM *3-Phase *11.6 Amps; Pressure: 30 mpa
  • Oil Tank: 88 Liter (22.3 gallon); Piston Travel: 9.84" (250mm) + 15.94" (405mm)
  • Worktable Size: 38-1/2" x 17-1/2" x 1-1/2"; Max. Length: 38-5/8"; Bending Thickness: Bending Thickness: (10mm) 25/64"
  • Press: 60" x 24" x 75-1/2" (crate: 69" x28" x 86") *estimate only* ; Hydraulic Station: 23-3/4" x 19-3/4" x 30" (crate: 28" x24" x 38") *estimate only* ; Weight G.W. / N.W. : Press: 3,018 lbs / 2,812 lbs *estimate only* Hydraulic Station: 284 lbs / 220 lbs *estimate only*

Electric 50 Ton Hydraulic Shop Press Brake Bender Bending 3 Phase 220 Volt

Features

  • Electric 50 Ton Hydraulic Press Brake
  • Capacity: 50 Ton (500kn) ; Hydraulic Motor: 220 Volt ; 3KW ; 2850 RPM ; 3-Phase ; 5.5 Amps
  • Cylinder Max Pressure 25MPA,TONNAGE: 502 KN; Pressure: 25 mpa ; Oil Tank: 12 L ; Pump: 2.5 ML/r ; Piston Travel: 8.66" (220mm) ; Table Travel: 15.94" (405mm)
  • Worktable Size: 13-1/2" x 30-1/2" x 1-1/8" ; Max. Length: 30-1/2" ; Bending Thickness: (5mm) 13/64"
  • Quantity: 1 ; Overall dimension: 50" x 20" x 66-1/2" (crate: 59" x26" x 78") *estimate only* ; Weight G.W. / N.W. : 1,529 lbs / 1,372 lbs *estimate only*

Baileigh 100-Ton Shop Press (HSP-100A)

Features

  • MOVABLE CYLINDER: 6.5" hydraulic cylinder moves left and right, helpful when you’re making off-center parts.
  • DELICATE CONTROL: Hand-operated lever gives you the option for more precise manual control.
  • YEARS OF USE: Industrial-grade hydraulic components cleanly deliver force to any project.
  • ADDED VALUE: Includes a set of V-blocks.
  • MAINTAINS RIGIDITY: Fully-welded plate steel frame provides less flex and more accurate pressing.
  • INDUSTRIAL-GRADE HYDRAULICS: Helps the machine last and run smoothly for many years of productivity.

EDWARDS 40 Ton Shop Press

Features

  • Hydraulic Presses
  • Machining Supplies
  • Machining
  • STATIONARY TOOLS

Chicago Pneumatic 8941086101 CP86101 100T WORKSHOP Press

Features

  • Pneumatic pump driven by foot
  • Two holes in each foot to fix in the floor
  • Two-step stroke system. Closed: full stroke for quick approach. Open: small stroke for fine tuning of the load.
  • Large gauge measuring short and metric Tons
  • Delivered with two v-blocks

Electric 30 Ton Hydraulic Shop Press Brake Bender Bending 3 Phase 220 Volt

Features

  • Electric 30 Ton Hydraulic Press Brake ; Capacity: 30 Ton (300 kn); Max. Length: 18-1/2"; Max. Thickness: 5/32" (4mm)
  • Hydraulic Motor:220 Volt ; 3KW ; 2850 RPM ; 3-Phase ; 5.5 Amps
  • Pressure: 25 mpa ; Piston Travel: 11.8" (300mm) ; Table Travel:10.63" (270mm); Table Size:18"x12"
  • Overall dimension: 39"x16"x56"(crate:46"x22"x62") ; Weight G.W./N.W.:1,298lbs/1,144lbs
  • Quantity:1 ; All dimensions provided are rough estimate only

Chicago Pneumatic 8941086751 CP86751 75T WORKSHOP Press

Features

  • Pneumatic pump driven by foot
  • Two holes in each foot to fix in the floor
  • Two-step stroke system. Closed: full stroke for quick approach. Open: small stroke for fine tuning of the load.
  • Large gauge measuring short and metric Tons
  • Delivered with two v-blocks

OTC 1850 55-Ton Capacity Shop Press with Air-Driven Hydraulic Pump

Features

  • OTC's tough, economical, 55-ton capacity press features heavy steel construction with a durable powder coat finish and is ideal for pressing rear axle bearings, piston pins, and much more
  • Large 35 inch x 41 inch work area under ram makes positioning of even bulky work easy
  • Pneumatically driven hydraulic pump with simple foot operation keeps both hands free; press bed is raised or lowered with a hand crank, allowing one-person set-up and operation
  • Press comes complete with No. 4020 Air Hydraulic Pump, No. 10492 Gauge, No. 24815 Tee, No. 36888 Hose, No. 52457 Hydraulic Ram with 6-1/4 inch stroke
  • Unit stands 70-3/4 inches tall, 47-1/2 inches wide, and 28 inches deep; frame extension holes are on 5 inch centers; backed by OTC's Lifetime Marathon Warranty

Grizzly Industrial T1242-30-Ton Shop Press

Baileigh 75-Ton Pneumatic Shop Press (HSP-75A)

Features

  • YEARS OF USE: Industrial-grade hydraulic components cleanly deliver force to any project.
  • HANDS-FREE CONTROL: Integrated foot pedal makes this H-frame press easy to operate.
  • EASY TABLE MOVEMENT: Winch and pulley system lets you lift and lower the working table to save time (and back strain!)
  • ADDED VALUE: Comes standard with a V-block set.
  • DELICATE CONTROL: Hand-operated lever gives you the option for more precise manual control.

Chicago Pneumatic CP86501 55.12-Short Tons Workshop Press with Steel Frame

Features

  • Chicago pneumatic cp86501

Baileigh 50-Ton Pneumatic Shop Press (HSP-50A)

Features

  • SMOOTH AND DEPENDABLE USE: Industrial-grade hydraulic parts.
  • PRECISE CONTROL: Manual hand pump on the side of press.
  • ELIMINATES FLEXING AT FULL FORCE: Rigid, fully-welded steel main frame delivers accurate results.
  • GREAT VALUE: Comes standard with a set of V-blocks.
  • CONVENIENT CONTROL: Foot pedal allows for simple, hands-free machine control.
  • EASY TABLE MOVING: Winch and pulley system lets you lift and lower the working table to save time (and back strain!)

OTC 1833 25-Ton Capacity Shop Press with Hydraulic Hand Pump

Features

  • OTC's tough, economical, 25-ton capacity press features heavy steel construction with a durable powder coat finish and is ideal for pressing rear axle bearings, piston pins, and much more
  • Large 30 inch x 46 inch work area under ram makes positioning of even bulky work easy
  • Press bed is raised or lowered with a hand crank, allowing one-person set-up and operation
  • Press comes complete with No. 4002 Hydraulic Hand Pump, No. 9652 Gauge, No. 24815 Tee, No. 9767 Hose, No. 51426 Hydraulic Ram with 6-1/4 inch stroke, and No. 42733-WH2 Pump Mounting Bracket
  • Unit stands 69-1/2 inches tall, 40-1/2 inches wide, and 28 inches deep; 56-1/2 inch x 28 inch total floor space; frame extension holes are on 4 inch centers; backed by OTC's Lifetime Marathon Warranty

Chicago Pneumatic 8941086501 CP86500 50T WORKSHOP Press

Features

  • Two holes in each foot to fix in the floor
  • Steel frame
  • Two-step stroke system. Closed: full stroke for quick approach. Open: small stroke for fine tuning of the load.
  • Large gauge measuring short and metric Tons
  • Delivered with two v-blocks

ZINKO 15 Ton Shop Press Model: ZSP-15S

SLRMKK 10 Ton Hydraulic Press,Hydraulic Shop Floor Press 22046 Lb W/with Heavy Duty Steel Plates and H Frame Working Distance Width Reach Up to 13.8 in Top Mount for Gears and Bearings

Features

  • 【RELIABLE QUALITY】- Painting process to protect steel and made it anti-corrosion, ensuring long life, thickened column, strong and durable.
  • 【10T CAPACITY】- Its working width: 350mm(13.8''); working height: 375mm(14.8''). Capacity: 10T. Stroke: 178mm(7''). It is very helpful and useful as a shop press. Strong enough to meet your demand.
  • 【SEPARATE HYDRAULIC PUMP】- The pump body is small, lightweight and solid, which makes the operation easy and effortless. Made of high-strength sealing ring, which can effectively prevent oil leakage.
  • 【THREE-STAGE DESIGN】- Three-stage design that can be adjusted up and down, the operating space can be adjusted as needed to make the product more user-friendly.
  • 【BROADLY USED】- Easy to use press for large or small shops and many different kinds of metalworking jobs, including bending, stamping, and more.

Williams 55 TON & 100 TON Shop Press Guard (JHW55100SPG)

Features

Part NumberJHW55100SPG

45 Ton Air Hydraulic Floor Shop Press RATE within 48 states

Features

  • 45 Ton Air Hydraulic Floor Shop Press
  • Capacity: 45 Ton; Working Range: 0-725mm - 0~28-1/2"
  • Air Inlet Fitting: 1/4" NPT; Air Pressure: 100-140PSI
  • Stroke: 190mm - 7-1/2"; Bed Width: 800mm - 31-1/2"
  • Quantity: 1 ; We CANNOT ship to HI, AK, PR, Canada, nor PO BOX. Please contact us first.

Heavy Duty 45 Ton Air Hydraulic Floor Shop Press w/Guage

Features

  • 45 Ton Air Hydraulic Floor Shop Press
  • Air Pressure: 100-140PSI ; Air Inlet Fitting: 1/4" NPT
  • Working Range: 0-725mm - 0~28-1/2"
  • Stroke: 190mm - 7-1/2" ; Bed Width: 800mm - 31-1/2"
  • Quantity: 1

MH Amazon Heavy Duty 45 Ton Air Hydraulic Floor Shop Press Air Pump

Features

  • 45 Ton Air Hydraulic Shop Press ; Capacity: 45 Ton ; Bed Width: 800mm - 31-1/2"
  • Air Pressure: 100-140PSI ; Working Range: 0-725mm - 0~28-1/2"
  • Air Inlet Fitting: 1/4" NPT ; Stroke: 190mm - 7-1/2"
  • Overall dim: 15''L X 39'"W x 67''H ; Quantity: 1
  • We CANNOT ship to HI, AK, PR, Canada, nor PO BOX. Please contact us first.

TCE TCE50030 Torin Steel H-Frame Pneumatic Air Hydraulic Garage/Shop Floor Press with Hand and Foot Pump Pedal, 50 Ton (100,000 lb) Capacity, Blue

Features

  • Heavy-duty steel H-frame pneumatic air hydraulic garage/shop floor press is designed for straightening, bending, pressing, and stamping; Includes arbor press stamping plates and an easy to ready pressure gauge
  • Manually raise and lower the table surface for the best working distance for the job; Equipped with a 50 ton (100,000 lb) load capacity with a working range from 3-3/8" to 42"
  • Piston-ram is treated and polished to resist skiving; Shop press measures 51-1/4" L x 31-3/8" W x 75-5/8" H
  • Treated with a powder-coated, lead-free paint, providing a durable coating which is oil, grease, and dirt-resistant for easy cleanup
  • Meets ASME PASE safety standards and includes a limited 2 year manufacturer warranty

Chicago Pneumatic 8941086301 CP86300 30T WORKSHOP Press

Features

  • Two holes in each foot to fix in the floor
  • Steel frame
  • Two-step stroke system. Closed: full stroke for quick approach. Open: small stroke for fine tuning of the load.
  • Large gauge measuring short and metric Tons
  • Delivered with two v-blocks

12 Ton Hydraulic Press Heavy Duty Hydraulic Workshop Garage Shop Standing Press - Build Your Own Shop Press

Features

  • High quality and brand new
  • Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
  • DIY Work Shop Equipment
  • You will never realize how much you need a shop press until you have one.
  • Piston-ram is treated and polished to resist skiving

Table of Contents